Brass Rapid Fittings

Product Description

1.Rapid Fittings can be used with rigid nylon tubing

2.Nickel-plated brass bodies ensures anti-corrosion and anti-contamination

3.Thread: BSPT,NPT,Metric threads

4.A locking nut is provided and can be tightened both manually and with a spanner.

5.The special shape of the guiding cone ensures that the tube can not be accidentally cut.

Features

1. Ideally use in vacuum systems & confined spaces where tight bend radii are required

2. Recommend Plastic Tube: PA polyethylene braided PVC rilsan polyurethane, also be used with rigid PA tubes. 

3. For simple and quick connection of pneumatic circuits even without the use of a spanner. 

4. Unique barb shape ensures good grip on tube even if just tightened by hand. 

5. The special shape of the guiding cone avoid that the tube rupture accidentally. 

6. Corrosion resistant thanks to Nickel plated.

7. Tubing locking nuts included.

Installation Instructions

1. Ensure that the end of the tube is cut square and is free from burrs.

2. Place the knurled nut over the tube, See figure 1

3. Push the tube over the barbed end of the fitting up to the tube stop. See figure 2

4. Screw the knurled nut onto the fitting until finger or wrench tight.

(The hexagon on the nut is to aid release) See figure 3

Interchange

Camozzi - Rapid Fittings, Norgren - Push-On Tube Fittings, Pneumax - Quick Fittings….

Specification

1. Material: Nickel-Plated Brass

2. Media: Compressed air low pressure fluids

3. Thread: BSPP & BSPP as standard, other styles available on request.

4. Operating pressure: Vacuum -15 bar (mainly depending on tube's endurance)

5. Temperature: -18°C to +70°C.

Hot Tags: brass rapid fittings, China, manufacturers, suppliers, factory, customized, low price, made in China