The different between pneumatic angle seat valve and solenoid valve

The pneumatic angle seat valve is a kind of pneumatic valve, which is driven by compressed air. The electromagnetic valve uses electromagnetic coil; the angle seat valve does not need electric control, and the electromagnetic valve has a wide range of uses.

The pneumatic angle seat valve regulates the flow. The pneumatic angle seat structure is very suitable for high pressure and large differential pressure conditions, but the diameter is relatively small.

Pneumatic angle seat valve requires two-position three-way or two-position five-way solenoid valve to control valve opening and closing, single-acting normally closed or normally open pneumatic angle seat valve optional two-position three-way or five-way reversing solenoid valve, double-acting pneumatic The angle seat valve can only choose two five-way pneumatic angle seat valve.

As long as there is a water inlet, a pneumatic angle seat valve is required in principle. The angle seat valve is equivalent to a joint with a switch. It is used to connect the water outlet and the water inlet pipe. The seat is only used for a cool water, so use a washbasin. If you have hot and cold water, you need two, and the sink is the same. There are many brands of angle valves, what Kinder's, Shida's, and all major sanitary ware brands have their own brand of angle valves, the price is generally more expensive, but you can enjoy the warranty with its products, remember, don't Look at these accessories, the problem is often here, if not, don't worry. Get some money, be practical! Generally, there are two places where the angle valve is used, two water tanks, two water heaters, one toilet seat and two bathroom cabinets.

Schematic diagram of pneumatic angle seat valve