DOT Type Connector
Full flow design, provides up to 60% more flow area than conventional fittings with internal tube supports.
Application
1. Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places.
2. Full flow design, provides up to 60% more flow area than conventional fittings with internal tube supports.
Features
1. Brass construction. Elbows and tees are forged brass.
2. Swivel elbow and tees for ease of orientation.
3. DOT approved. Pre-applied PTFE based pipe sealant on all male pipe threads, VITON (FKM) O-ring sealing in all of fittings
4. Typical Applications: windows, door locks, mirrors, wipers, air operated seats, operating gauges, air horns, heater controls, gear shifts, fifth wheels, and air brake connections.
Construction
Assembly | Disassembly |
|
|
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Specification
Fluid | Air, Vaccum | |
Pressure Range | 0~250PSI | |
Max Pressure | Determined by maximum working pressure of the recommended plastic tubing | |
Material | CA 360 Brass | |
Temperature Range | -30 to +250 °C | |
Applicable Tube | PU (Polyurethane) | PA (Nylon) |
DOT Push To Connect Air Brake Fittings
Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements
Advantage Of D.O.T. Push To Connect Fittings
1.Fast assembly: No tools required. Simply push tubing in. Saves up to 75% of assembly time compared to standard air compression fittings. No loose parts to handle.
2.Fast disconnect: Hold the collect collar with two fingers and pull out tube. No tools required.
3.Reusable: Can be connected and disconnected several times.
4.Reliable sealing: Using recommended tubing, full sealing is guaranteed.
5.Versatility: Viton (FKM). Secure Tube Retention. Pulling on tubing only serves to tighten the connection.
6.Pre-Applied Teflon based pipe sealant on all male pipe threads, saving customer additional labor.
7.Full Flow Design, provides more flow area than conventional fittings with internal tube supports even in the swivels.
DOT Fittings are constructed with an all brass captive eyelet which allows for maximum flow. The brass captive eyelet with extended length is floating and has a machined top end radius for easy instal-lation of tubing. All male threads have a pre-applied Teflon based pipe sealant to provide for easy assembly and leak proof seal.
Materials: CA360 Brass (Barstock), CA377 (Forged) "O" Ring: FKM ( Viton sealing)
Ordering Options
The following options are available only by customer request and may be subject to minimum run quantities for ordering.
-Other Material of "O" Ring seals.
-Metric Tube DOT "One-Push" tube fittings with BSP threads.
Hot Tags: dot type connector, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
