Push-in Drain Coffee Machine Nylon Solenoid Valve
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Push-in Drain Coffee Machine Nylon Solenoid Valve
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
Push-in Drain Coffee Machine Nylon Solenoid Valve is made of high-strength nylon body with push-in fitting for easy installation. It features fast response, good sealing, corrosion resistance and long service life, specially used for water drainage and flow control in coffee machines and beverage equipment.
General Specifications
| Parameter | Value / Range |
|---|---|
| Model | Push-in Drain Type (Nylon body) |
| Valve Type | 2/2-way, direct-acting or pilot-operated |
| Valve Body Material | Grivory® nylon / food-grade PA66 |
| Normally State | Normally closed (standard) / Normally open (optional) |
| Operating Pressure | 0 – 1.0 MPa (direct-acting) / 0.02 – 1.0 MPa (pilot type) |
| Port Connection (Inlet) | G1/8", G1/4" threaded / barbed fitting |
| Port Connection (Outlet/Drain) | Push-in (quick-connect) for 4mm, 6mm, or 8mm OD tube |
| Orifice Size (DN) | DN1.5 – DN4 (depending on model) |
| Working Medium | Water, coffee, hot water, air (food-grade applications) |
| Fluid Temperature | 0°C ~ 80°C (nylon body rating) |
| Ambient Temperature | 0°C ~ 60°C |
| Operating Voltage | DC12V, DC24V (most common), AC110V, AC220V (optional) |
| Coil Power | DC: 4W–6W ; AC: 6VA–8VA |
| Protection Class | IP54 – IP65 (depending on coil type) |
| Seal Material | EPDM / NBR / FKM (FDA-compliant) |
| Duty Cycle | 100% continuous |
| Mounting Type | Inline with bracket or direct mounting |
| Application | Coffee machines, espresso machines, water dispensers, vending machines, ice makers |
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅Food-Grade Nylon Body – Safe & Compliant
✅Push-in Quick-Connect – Tool-Free Installation
✅Compact & Lightweight – Space Saving
✅Corrosion Resistant – Long Service Life
✅Low Power Consumption – Energy Efficient |
||||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: push-in drain coffee machine nylon solenoid valve, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
