STGT 2-Position 3-Way Direct-Acting Solenoid Valve
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
STGT 2-Position 3-Way Direct-Acting Solenoid Valve
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
STGT 2-Position 3-Way Direct-Acting Solenoid Valve is widely used for fluid direction switching control. It can complete medium commutation, shunt and cut-off work efficiently.
With simple structure and reliable performance, it is commonly applied in pneumatic components, automation equipment, pipeline reversing, hydraulic control and other industrial automatic control systems.
General Specifications
| Parameter | Specification | Remarks / Selection Notes |
|---|---|---|
| Product Model | STGT Series | 3/2-way direct-acting solenoid valve |
| Body Material | Brass / SUS304 Stainless Steel optional | Brass for economy, stainless steel for corrosive media |
| Operation Type | Direct-acting | Zero differential pressure start |
| Valve Function | 3/2-way (3 ports, 2 positions) | Normally Closed (NC) and Normally Open (NO) switching |
| Suitable Media | Air, water, steam, light oil (≤20CST), natural gas | |
| Operating Pressure | 0 ~ Max working pressure | Zero differential pressure start |
| Max Working Pressure (AC/DC) | Up to 25 bar / 25 bar (dependent on orifice) | Pressure varies by orifice size |
| Orifice Sizes | 1.0mm / 1.5mm / 2.0mm / 2.5mm / 3.0mm / 4.0mm | Small orifice for precise control |
| Kv Value | 0.07 ~ 0.35 m³/h | Dependent on orifice size |
| Connection Thread | G1/8" / G1/4" | Standard G-thread, NPT optional |
| Sealing Material | NBR (80℃) / EPDM (140℃) / FKM (150℃) | Select based on media temperature |
| Media Temperature | -10℃ ~ +150℃ (dependent on seal) | |
| Ambient Temperature | -10℃ ~ +80℃ | |
| Operating Voltage | AC220-230V 50-60Hz / AC100-120V / DC12-24V | |
| Power Consumption | AC: 22VA / DC: 15-17W | |
| Insulation Class | Class H | High temperature resistance |
| Protection Rating | IP65 (DIN43650A 3-pole connector) | Dustproof & waterproof; lead wire/explosion-proof coil options |
| Installation Orientation | According to flow direction arrow; horizontal coil upward recommended | For optimal life and reliability |
| Voltage Tolerance | ±10% | |
| Compatible Coils | B11/B21/B31/B32/E11 |
Dimensions & Specifications by Size
| Connection (G/NPT) | DN | Valve Dimensions (L×W×H mm) | Cv Value | Max Pressure |
|---|---|---|---|---|
| 1/2" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 3/4" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 1" | 25 | 96 × 70 × 145 | 12 | 0.03~7.5MPa |
| 1¼" | 32 | 150 × 135 × 170 | 25 | 0.03~7.5MPa |
| 1½" | 40 | 160 × 145 × 180 | 31 | 0.03~7.5MPa |
| 2" | 50 | 185 × 155 × 210 | 50 | 0.03~7.5MPa |
Temperature Ratings by Seal Material
| Sealing Material | Temperature Range | Suitable Media |
|---|---|---|
| NBR | -20℃ ~ +80℃ | Air, water, natural gas |
| EPDM | -40℃ ~ +120℃ | Hot water |
| VITON / PTFE | -50℃ ~ +260℃ | Oil, hot water, low-pressure steam |
Specification Selection Table (G1/8" Connection)
| Orifice (mm) | Kv Value (m³/h) | Max Pressure - AC (bar) | Max Pressure - DC (bar) | Brass Model |
|---|---|---|---|---|
| 1.5 | 0.07 | 13 | 11 | STGV1-A3-11X |
| 2.0 | 0.14 | 11 | 9 | STGV1-02-11X |
| 2.5 | 0.21 | 9 | 7 | STGV1-A4-11X |
| 3.0 | 0.25 | 6 | 4 | STGV1-03-11X |
| 4.0 | 0.35 | 3.5 | 2 | STGV1-04-11X |
(X = Seal code: N=NBR, E=EPDM, V=FKM, F=Special material)
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅Two-position three-way structure, realize medium switching and reversing
✅Direct acting design, fast response and flexible action
✅High precision sealing, stable sealing and no leakage
✅Compact overall layout, save installation space
✅Stable driving coil, low failure rate and long service life
✅Wide medium adaptability, easy to install and debug |
|
|||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: stgt 2-position 3-way direct-acting solenoid valve, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
