STM3 Coffee Machine Miniature Solenoid Valve
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
STM3 Coffee Machine Miniature Solenoid Valve
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
STM3 Coffee Machine Miniature Solenoid Valve is specially designed for coffee machine equipment. It has stable fluid control performance and complies with food safety standards.
It is mainly used in various types of coffee machines to realize automatic on-off control of water and fluid pipelines.
General Specifications
| Parameter | Specification | Remarks |
|---|---|---|
| Model | STM3 Series | Coffee machine miniature solenoid valve |
| Principle | Direct-acting | Zero differential pressure start |
| Valve Function | 3/2-way | Single coil switching control |
| Body Material | Engineering Plastic / Brass | Pressure & corrosion resistant |
| Connection Type | Female thread / Quick connect | Easy push-in installation for tubing |
| Flow Orifice Size | 1.0mm / 1.5mm / 2.0mm / 2.3mm | Small orifice for coffee machine brewing system – precise flow control |
| Working Pressure | 0 ~ 1.6 MPa (0-16 bar) | Direct-acting with zero differential pressure start |
| Media | Water, water-based solutions | Coffee machine hydraulic system |
| Media Temperature | 1℃ ~ 80℃ | Suitable for hot water/steam |
| Operating Voltage | AC220V / DC24V | AC220V for domestic units, DC24V for commercial |
| Protection Rating | IP65 (optional) | Moisture & dust resistant |
| Installation | Any orientation | Direct-acting type – no orientation restriction |
| Seal Material | EPDM / NBR / FKM | EPDM recommended for coffee machines (hot water resistance) |
| Leakage Rate | ≤0.1ml/min | Ultra-low internal leakage – stable brewing pressure |
| Service Life | ≥500,000 cycles | Meets coffee machine product lifecycle requirements |
Dimensions & Specifications by Size
| Connection (G/NPT) | DN | Valve Dimensions (L×W×H mm) | Cv Value | Max Pressure |
|---|---|---|---|---|
| 1/2" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 3/4" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 1" | 25 | 96 × 70 × 145 | 12 | 0.03~7.5MPa |
| 1¼" | 32 | 150 × 135 × 170 | 25 | 0.03~7.5MPa |
| 1½" | 40 | 160 × 145 × 180 | 31 | 0.03~7.5MPa |
| 2" | 50 | 185 × 155 × 210 | 50 | 0.03~7.5MPa |
Temperature Ratings by Seal Material
| Sealing Material | Temperature Range | Suitable Media |
|---|---|---|
| NBR | -20℃ ~ +80℃ | Air, water, natural gas |
| EPDM | -40℃ ~ +120℃ | Hot water |
| VITON / PTFE | -50℃ ~ +260℃ | Oil, hot water, low-pressure steam |
Specification Selection Table (G1/8" Connection)
| Orifice (mm) | Kv Value (m³/h) | Max Pressure - AC (bar) | Max Pressure - DC (bar) | Brass Model |
|---|---|---|---|---|
| 1.5 | 0.07 | 13 | 11 | STGV1-A3-11X |
| 2.0 | 0.14 | 11 | 9 | STGV1-02-11X |
| 2.5 | 0.21 | 9 | 7 | STGV1-A4-11X |
| 3.0 | 0.25 | 6 | 4 | STGV1-03-11X |
| 4.0 | 0.35 | 3.5 | 2 | STGV1-04-11X |
(X = Seal code: N=NBR, E=EPDM, V=FKM, F=Special material)
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅Mini compact structure, perfectly fit narrow internal space of coffee machines
✅Food-grade sealing parts, safe, hygienic and no medium pollution
✅Sensitive switch action, fast response and stable operation
✅Excellent pressure resistance, adapt to water pipeline working conditions
✅Low noise during operation, comfortable for equipment use
✅Small size and easy installation, low failure rate and long service life |
|
|||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: stm3 coffee machine miniature solenoid valve, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
