Ultra-High Pressure 20-200 Bar Stainless Steel Solenoid Valve
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Ultra-High Pressure 20-200 bar Stainless Steel Solenoid Valve
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
Ultra-High Pressure 20-200 bar Stainless Steel Solenoid Valve is made of stainless steel, specially developed for ultra-high pressure fluid pipelines. It can work stably within 20 to 200 kg pressure range.
It is widely used in industrial cleaning, high-pressure atomization, hydraulic equipment and other fields to realize automatic on-off control of ultra-high pressure medium.
General Specifications
| Parameter | Specification | Remarks |
|---|---|---|
| Product Series | ZCGY / ZCPY Series | For ultra-high pressure applications |
| Principle | Pilot-operated piston type | Requires minimum differential pressure |
| Valve Function | 2/2-way | Normally closed as standard |
| Body Material | Stainless Steel SUS304 / 316 | High pressure resistant, corrosion resistant |
| Piston Material | 304 Stainless Steel Double-Ring Piston | Double-ring structure enhances wear resistance |
| Seal Material | Metal hard seal / PTFE filling | Tighter seal under higher pressure |
| Media | Water, gas, oil, hydraulic oil, corrosive fluids | For ultra-high pressure pipeline systems |
| Working Pressure Range | 2 ~ 20 MPa (20-200 bar) | Some models reach 0.1-400 MPa |
| Minimum Start Pressure | ≥ 0.1-2.0 MPa (model dependent) | Pilot-operated requires minimum start pressure |
| Flow Orifice Size | DN1 ~ DN50 | Small bore precision control |
| Connection Type | Female thread (G/NPT) / Flanged | Threaded for DN≤50, flanged for DN>50 |
| Media Temperature | -20℃ ~ +200℃ (dependent on seal) | High temperature up to 400℃ available |
| Operating Voltage | DC24V / AC220V (standard) | DC24V common safety voltage |
| Protection Rating | IP65 / Explosion-proof (Exd IICT5) | Select explosion-proof for hazardous locations |
| Insulation Class | Class H | High temperature resistance |
| Leakage Rate | Zero leakage | Dynamic sealing technology |
| Installation | Any orientation | Pilot-operated – no orientation restriction |
Dimensions & Specifications by Size
| Connection (G/NPT) | DN | Valve Dimensions (L×W×H mm) | Cv Value | Max Pressure |
|---|---|---|---|---|
| 1/2" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 3/4" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 1" | 25 | 96 × 70 × 145 | 12 | 0.03~7.5MPa |
| 1¼" | 32 | 150 × 135 × 170 | 25 | 0.03~7.5MPa |
| 1½" | 40 | 160 × 145 × 180 | 31 | 0.03~7.5MPa |
| 2" | 50 | 185 × 155 × 210 | 50 | 0.03~7.5MPa |
Temperature Ratings by Seal Material
| Sealing Material | Temperature Range | Suitable Media |
|---|---|---|
| NBR | -20℃ ~ +80℃ | Air, water, natural gas |
| EPDM | -40℃ ~ +120℃ | Hot water |
| VITON / PTFE | -50℃ ~ +260℃ | Oil, hot water, low-pressure steam |
Specification Selection Table (G1/8" Connection)
| Orifice (mm) | Kv Value (m³/h) | Max Pressure - AC (bar) | Max Pressure - DC (bar) | Brass Model |
|---|---|---|---|---|
| 1.5 | 0.07 | 13 | 11 | STGV1-A3-11X |
| 2.0 | 0.14 | 11 | 9 | STGV1-02-11X |
| 2.5 | 0.21 | 9 | 7 | STGV1-A4-11X |
| 3.0 | 0.25 | 6 | 4 | STGV1-03-11X |
| 4.0 | 0.35 | 3.5 | 2 | STGV1-04-11X |
(X = Seal code: N=NBR, E=EPDM, V=FKM, F=Special material)
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅All stainless steel structure, outstanding pressure bearing capacity
✅Designed for 20-200kg ultra-high pressure range, wide application
✅High-strength sealing components, zero leakage under extreme pressure
✅Optimized internal structure, stable operation for frequent switching
✅Anti-corrosion and wear-resistant, suitable for harsh working conditions
✅Solid construction, easy installation and long service life |
|
|||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: ultra-high pressure 20-200 bar stainless steel solenoid valve, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
