TN Double Shaft Pneumatic Cylinder
Installation and fixing with embedded body saves installation space, has certain bending and torsion resistance, and can withstand a certain lateral load; fixing plate has installation holes on three sides, which is convenient for multi-position loading; anti-collision cushion at front end of body can adjust cylinder stroke and alleviate impact.
TN Double Shaft Pneumatic Cylinder is installation and fixing with embedded body to saves installation space,and it has certain bending and torsion resistance,can withstand a certain lateral load;
Description:
Bore size (mm) | 10 | 16 | 20 | 25 | 32 |
Fluid | Air | ||||
Action | Double acting, Single rod, Twin piston | ||||
Minimum operating pressure | 0.1 MPa | ||||
Maximum operating pressure | 1.0 Mpa | ||||
Proof pressure | 1.5 MPa | ||||
Ambient and fluid temperature | -20 to 80°C (No freezing) | ||||
Cushion | Rubber bumper | ||||
Lubrication | Non-lube | ||||
Port size | M5×0.8 | 1/8 | |||
Where to be used:
Tips:
1. The double-axle cylinder adopts embedded body mounting and fixing form, which saves installation space.
2. It has certain bending and torsion resistance, and the two-axle cylinder can withstand a certain lateral load.
3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading.
4. The front-end anti-collision gasket of the double-axle cylinder body can adjust the stroke of the cylinder and alleviate the impact.
5. The standard configuration of this series of double-axle cylinders is magnetic type, and all of them are optional without magnetic type.
Hot Tags: tn double shaft pneumatic cylinder, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
