1-Inlet 4-Outlet Customized Modular Brass Solenoid Valve
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
1-Inlet 4-Outlet Customized Modular Brass Solenoid Valve
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
1-Inlet 4-Outlet Customized Modular Brass Solenoid Valve is tailor-made per customer demand with 1 inlet and 4 independent outlets. It integrates multiple single solenoid valves on one brass base, replacing scattered separate valves. It is widely used in multi-channel water distribution equipment, automation testing equipment, small fluid control systems and special machinery to realize independent switch control of multiple branch pipelines.
General Specifications
| Parameter | Specification | Remarks / Selection Notes |
|---|---|---|
| Product Type | Modular Manifold Solenoid Valve | 1-inlet 4-outlet / 1-inlet 5-outlet available |
| Control Structure | 1 inlet, 4 outlets | Single inlet with four independent branch controls |
| Body Material | Brass (Forged Brass) | Corrosion resistant, economical and durable |
| Solenoid Valve Type | 2/2-way direct-acting / pilot-operated | Select based on flow and pressure requirements |
| Working Pressure | 0 ~ 1.0 MPa (0-10 bar) | Suitable for water, air, low pressure systems |
| Media Temperature | ≤100℃ | Standard media temperature range |
| Suitable Media | Water, air, light oil, low pressure steam | Multi-media compatible |
| Port Size | DN10 / DN15 / DN20 | Individual branch sizes customizable |
| Operating Voltage | AC220V / DC24V | Standard; other voltages available |
| Protection Rating | IP65 (optional) | Dustproof & waterproof |
| Manifold Material | Brass / Stainless Steel | Select based on media environment |
| Valve Group Structure | Square compact layout | Suitable for special installation environments |
| Control Type | Distribution type | Independent on/off control for each outlet |
| Connection Type | Female thread (G/NPT) / Quick connect | Customizable based on requirements |
| Installation | Manifold block fixed mounting | Compact valve arrangement |
Dimensions & Specifications by Size
| Connection (G/NPT) | DN | Valve Dimensions (L×W×H mm) | Cv Value | Max Pressure |
|---|---|---|---|---|
| 1/2" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 3/4" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 1" | 25 | 96 × 70 × 145 | 12 | 0.03~7.5MPa |
| 1¼" | 32 | 150 × 135 × 170 | 25 | 0.03~7.5MPa |
| 1½" | 40 | 160 × 145 × 180 | 31 | 0.03~7.5MPa |
| 2" | 50 | 185 × 155 × 210 | 50 | 0.03~7.5MPa |
Temperature Ratings by Seal Material
| Sealing Material | Temperature Range | Suitable Media |
|---|---|---|
| NBR | -20℃ ~ +80℃ | Air, water, natural gas |
| EPDM | -40℃ ~ +120℃ | Hot water |
| VITON / PTFE | -50℃ ~ +260℃ | Oil, hot water, low-pressure steam |
Specification Selection Table (G1/8" Connection)
| Orifice (mm) | Kv Value (m³/h) | Max Pressure - AC (bar) | Max Pressure - DC (bar) | Brass Model |
|---|---|---|---|---|
| 1.5 | 0.07 | 13 | 11 | STGV1-A3-11X |
| 2.0 | 0.14 | 11 | 9 | STGV1-02-11X |
| 2.5 | 0.21 | 9 | 7 | STGV1-A4-11X |
| 3.0 | 0.25 | 6 | 4 | STGV1-03-11X |
| 4.0 | 0.35 | 3.5 | 2 | STGV1-04-11X |
(X = Seal code: N=NBR, E=EPDM, V=FKM, F=Special material)
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅Custom one-inlet four-outlet integrated layout, centralized pipeline control to save installation space
✅Integral brass manifold body, compact structure, good pressure resistance and corrosion resistance
✅Independent single-valve control, each outlet can be opened/closed separately for flexible flow distribution
✅Precision internal sealing structure, effectively avoid cross-leakage between each channel
✅Unified wiring layout, convenient circuit connection and later maintenance
✅Non-standard customizable size and port specification according to customer on-site pipeline requirements |
|
|||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: 1-inlet 4-outlet customized modular brass solenoid valve, China, manufacturers, suppliers, factory, customized, low price, made in China
STGV 3/2-Way Direct-Acting Brass Solenoid Valve
STDF Underwater Waterproof Solenoid Valve For Fountains
ZQDF Ultra-High Temperature Thermal Oil Solenoid Valve
STP21 Direct-acting Waterproof Miniature Solenoid Valve
STP11 Stainless Steel Manual Override Solenoid Valve
Stainless Steel High Pressure Solenoid Valve
Send Inquiry
