Waterproof Molded Coil With Junction Box AC110V
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube . Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East. We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Waterproof Molded Coil with Junction Box AC110V
Basic Info:
We Mainly do Pneumatic Cylinder, solenoid valve, pneumatic valve, air treatment units, quick connection fittings and PU tube .
Our 4V. 3V.2V.2p .solenoid valve ,and 4A.3A Pneumatic valve sell so hot in Asia, Europe,and Middle East.
We are popular in pneumatic and Hydraulic market. Our accessories taked from the same supplier as Airtac.
Product Overview
Waterproof Molded Coil with Junction Box AC110V adopts fully sealed waterproof structure with built-in wiring terminal box, serving as the driving core of matched solenoid valves. It is widely used in outdoor cold mist equipment, industrial pipeline valves and humidification equipment with humid or open installation environment.
General Specifications
| Parameter | Specification | Remarks / Selection Notes |
|---|---|---|
| Product Type | Waterproof Molded Solenoid Valve Coil | With DIN junction box type |
| Molding Material | PBT / PA66 / PC / BMC | Thermoplastic integral molding |
| Interface Standard | DIN43650A (ISO 4400) | Industrial standard, plug-and-play |
| Operating Voltage | AC110V 50/60Hz | Specifically for 110V power systems |
| Power Rating | 15-25W (model dependent) | Low power design |
| Insulation Class | Class H (max 180℃) | High temperature resistance |
| Protection Rating | IP65 / IP67 | Dustproof & waterproof |
| Duty Cycle | 100% ED | Suitable for long-term continuous energization |
| Electrical Connection | DIN junction box (screw terminals) | Lead wire type optional |
| Indicator Light | LED indicator optional (red/green) | For on-site status inspection |
| Voltage Tolerance | ±10% | Allowable voltage fluctuation range |
| Ambient Temperature | -40℃ ~ +80℃ | Suitable for extreme cold to high temperature |
| Certifications | CE / RoHS / UL (select models) | Export certifications |
| Compatible Valve Bodies | 4V110/4V200/4V300, S Series, ST Series, etc. | Select based on original valve model |
Dimensions & Specifications by Size
| Connection (G/NPT) | DN | Valve Dimensions (L×W×H mm) | Cv Value | Max Pressure |
|---|---|---|---|---|
| 1/2" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 3/4" | 15 | 68 × 48 × 125 | 4.5 | 0.03~7.5MPa |
| 1" | 25 | 96 × 70 × 145 | 12 | 0.03~7.5MPa |
| 1¼" | 32 | 150 × 135 × 170 | 25 | 0.03~7.5MPa |
| 1½" | 40 | 160 × 145 × 180 | 31 | 0.03~7.5MPa |
| 2" | 50 | 185 × 155 × 210 | 50 | 0.03~7.5MPa |
Temperature Ratings by Seal Material
| Sealing Material | Temperature Range | Suitable Media |
|---|---|---|
| NBR | -20℃ ~ +80℃ | Air, water, natural gas |
| EPDM | -40℃ ~ +120℃ | Hot water |
| VITON / PTFE | -50℃ ~ +260℃ | Oil, hot water, low-pressure steam |
Specification Selection Table (G1/8" Connection)
| Orifice (mm) | Kv Value (m³/h) | Max Pressure - AC (bar) | Max Pressure - DC (bar) | Brass Model |
|---|---|---|---|---|
| 1.5 | 0.07 | 13 | 11 | STGV1-A3-11X |
| 2.0 | 0.14 | 11 | 9 | STGV1-02-11X |
| 2.5 | 0.21 | 9 | 7 | STGV1-A4-11X |
| 3.0 | 0.25 | 6 | 4 | STGV1-03-11X |
| 4.0 | 0.35 | 3.5 | 2 | STGV1-04-11X |
(X = Seal code: N=NBR, E=EPDM, V=FKM, F=Special material)
Sealing Materials & Temperature Range
| Seal Code | Sealing Material | Fluid Temperature | Suitable Media |
|---|---|---|---|
| X=N | NBR | -20℃ ~ 80℃ | Air, water, natural gas |
| X=E | EPDM | -20℃ ~ 135℃ | Hot water |
| X=V | VITON | -10℃ ~ 155℃ | Hot oil, hot water |
Model & Specification Table (G/NPT Thread Connections)
| Port Size | Orifice (mm) | Flow (Cv) | Pressure Rating |
|---|---|---|---|
| 1/2" | 15 | 4.5 | 0.3~16 Bar |
| 3/4" | 20 | 7.6 | 0.3~16 Bar |
| 1" | 25 | 12 | 0.3~16 Bar |
| 1½" | 40 | 19.2 | 0.3~16 Bar |
| 2" | 50 | 24 | 0.3~16 Bar |
Electrical Specifications
| Voltage | Coil Power | Operating Current | Coil Model | Connection Type |
|---|---|---|---|---|
| AC220V | 9VA | 0.04A | BA11 | Junction box |
| DC24V | 8W | 0.35A | BA11 | Junction box |
| AC110V | 9VA | 0.82A | BA11 | Junction box |
| DC12V | 8W | 1.68A | BA11 | Junction box |
| AC24V | 9VA | 0.375A | BA12 | 300mm lead wires |
| AC36V | 9VA | 0.25A | BA12 | 300mm lead wires |
Quick Selection Guide
| Nominal Diameter | Pipe Size | Recommended Model |
|---|---|---|
| DN10 | 3/8" | 2W-15-31X |
| DN15 | 1/2" | 2W-15-41X |
| DN20 | 3/4" | 2W-20-51X |
| DN25 | 1" | 2W-25-61X |
| DN32 | 1-1/4" | 2W-32-71X |
| DN40 | 1-1/2" | 2W-40-81X |
| DN50 | 2" | 2W-50-91X |
Media & Seal Material Selection
|
Selection Tips
1, Voltage Matching: AC220V is for standard mains power; DC24V/12V are better for industrial control, vehicle, and low-voltage systems. Always confirm the coil voltage to avoid burnout. 2,Temperature Limits: The seal material determines the maximum operating temperature. For example, NBR (80°C max) is not suitable for continuous use in hot water above 80°C, as it will degrade and leak. 3,Media Compatibility: Oily media requires VITON seals, as NBR will swell and fail in oil. Steam applications should use VITON or higher-grade seals. 4,Size Consistency: Always match the valve size to your pipe's nominal diameter. Using a smaller valve will restrict flow and shorten its lifespan.
Supplementary Key Points (3 Points Summary)
✅PTFE Seal UpgradePTFE sealing is newly upgraded, with temperature resistance up to 260℃, excellent resistance to strong acid, alkali and organic solvents, ideal for chemical and high-temperature steam working conditions.
✅Dual Power OptionsIt provides dual power specifications: 22VA/30VA for AC and 17W/24W for DC, matching different coil types and adaptable to customers' various power load requirements.
✅Model Code RuleThe letter X in the model stands for sealing material code: N=NBR, E=EPDM, V=VITON; just replace it directly when ordering.
Our Advantages:
✅Integral Molded Waterproof Construction: Coils are fully encapsulated in thermoplastic materials (PBT/PA66/PC, etc.) with complete seamless sealing, achieving protection ratings of IP65/IP67 – dustproof, waterproof, moisture-resistant, and oil-resistant. Suitable for outdoor, damp, and water-exposed applications .
✅Integrated DIN Junction Box: Built-in DIN43650A standard junction box with plug-and-play installation for easy maintenance and secure wiring. Optional LED indicator available for at-a-glance energization status .
✅AC110V Dedicated Voltage: Specifically designed for AC110V 50/60Hz power systems with 15-25W power rating, Class H (180℃) insulation, and 100% continuous duty cycle – suitable for long-term energization applications |
|
|||||||||||||||||
Production Workshop：
Where to be used：
Supplier's popular products:
![KJW1D7LNZMZJLDZ(NEL[]RB](/Content/uploads/2020480534/20200610134717b0421f6654e94d0da8c0a2ff0841247c.png "product-803-416")
Tips:
1. Your inquiry related to our products or prices will be replied in 24 hours
2. Well-trained and experienced staffs to answer all your inquiries in fluent English.
3. OEM&ODM, any your customized lightings we can help your to design and put into product.
4. Distributorship is offered for your unique design and some our current models.
5. Protect your sales area, ideas of design and all your private information.
When selecting a stainless steel pneumatic air gripper cylinder, consider factors such as gripping force, stroke length, operating pressure, compatibility with the object size and weight, and the specific environmental conditions of your application. It is advisable to consult the manufacturer's specifications and guidelines to ensure the proper selection, installation, and operation of the gripper cylinder for your specific requirements.
Hot Tags: waterproof molded coil with junction box ac110v, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
