About the accuracy of vibrating screening

The summary of the screening accuracy is not as follows:

1. The screen of the screen is clogged (to increase the anti-clogging device)

2. The material injected into the vibrating screen is too moist (large viscosity, properly dried and put into the vibrating screen)

3. Uneven feeding of vibrating screen (increasing material splitter)

4. The thickness of the sieve on the vibrating screen is too thick (increasing the material splitter to control the amount of feed)

Solution:

1. Always reduce the light vibrating screen load and clean the vibrating screen

2. Change the screen box inclination

3. Mediate the feed amount of the vibrating screen

4. Tension the screen and pull the drive belt