Design points of pneumatic clamps

Design points of pneumatic clamps

The main design of the pneumatic clamp can be seen from the following points:

Design is flexible

The pneumatic clamp has a certain elasticity, and the support plate is added in the clamp plate, and the screws are used for fixing. Different industrial requirements may have different screws and hole positions, and the requirements for the data fit are very high. The precision design of the pneumatic clamp, the civil service requirements in the outer diameter of the inner diameter are very strict, if the error is too large, to prevent the wall from being too thin or too thick, so that it does not play the role of clamping and positioning. The design of the pneumatic clamp requires that the clamping force must be uniform and the elasticity should be sufficient. When the workpiece is clamped, the degree of tightness cannot be different. For a good pneumatic clamp, it is required to have a value within the rule range. The dimensions and elasticity of a pneumatic clamp are required. The positive and negative values are within the same force range. This is the basic pneumatic clamp design requirement of Zui.

Service life is guaranteed

The service life of pneumatic clamps must be ensured. The materials used in general pneumatic clamps are all wear-resistant to achieve certain detection. Generally, softer steels cannot meet the requirements of manufacturing pneumatic clamps, and are very simple to deform. The plates of pneumatic clamps are generally manufactured using carbon tool steel, which is generally selected from T8. This material can also be used repeatedly after adding lubricating oil. The elastic piece of the inner sleeve can also reduce friction as much as possible, and the service life must be at least several years. This is the basic requirement for the pneumatic clamp.

Compact structure

The structure of the pneumatic clamp design must be very compact. If there is a gap at any position, the reinforcement component will not be able to achieve the required effect. The loading and unloading of each workpiece needs to be carried out on the pneumatic clamp. After each component is clamped, it is used. , have the same effect. Pneumatic clamps must be able to improve the power in use. The production fixtures are designed to remove the manual one by one, so pneumatic clamps must be able to reduce labor costs. Pneumatic clamps can be completed quickly and once. The component is positioned so that it is a perfect pneumatic clamp.