How to maintain the pneumatic system?

In the normal operation process of pneumatic system, clean and dry compressed air should be used as the working medium, and the air in the piping should be fully blown out. This is to prevent impurities from being brought into the system, resulting in poor action of cylinder and various valves, thus shortening the service life of pneumatic components in the pneumatic system.

After the normal operation of the pneumatic system, it is necessary to regularly check the working condition of the air source processor such as the air filter and oil mist filter. Some need to drain water in time (except for automatic drainage), and some need to refuel.

If a pneumatic system is not used for a long time, some pneumatic components in the system need to maintain a small working frequency. For example, the cylinder and solenoid valve need to maintain a working frequency of once every 30 days. In addition, it is necessary to check the operation of various pneumatic components to ensure the normal operation of the pneumatic system.