Overview of knowledge about gasing outer tube automatic welding machine

Overview of knowledge about gas spring outer tube automatic welding machine

The gas spring (Spring) outer tube automatic welding machine is a kind of welding equipment. What are its performance characteristics and application scope? Here is a brief introduction to it, as described below.

1. Performance characteristics

The gas spring outer tube automatic welding machine is controlled by PLC, with high welding efficiency and good welding quality. The welding output of one gas spring automatic welding machine is equivalent to the output of three manual welding, and the welding quality is stable, and it is not affected by artificial emotion and technology. . All operations are controlled by PLC. The touch screen can set the welder related data and can be saved in the system. The next time you weld the same model, you only need to call the data in the computer, no need to input again, rotation, stop, welding delay, The gun buffer, arc starting, and arc closing are completely controlled by the program.

2. Scope of application

The gas spring automatic welding machine can be equipped with argon arc welding machine, plasma welding machine and carbon dioxide protection welding. The welding power source can be selected from micro-beam plasma, AC, DC and inverter power supply. The controllable gas spring is an industrial accessory that can support, cushion, brake, height adjust and adjust the angle. It consists of the following parts: pressure cylinder, piston rod, piston, seal guide sleeve, packing (inert gas or oil and gas mixture), in-cylinder control elements and out-of-cylinder control elements (referred to as controllable gas springs) and joints. The principle of the controllable gas spring is to fill the sealed pressure cylinder with an inert gas or a mixture of oil and gas, so that the pressure in the chamber is several times or several times higher than the atmospheric pressure, and the cross-sectional area of the piston rod is smaller than the cross-sectional area of the piston. The resulting pressure differential effects the movement of the piston rod.

Applicable products: gas spring end cap welding, stainless steel (stainless acid resistant steel) and other materials end cap connection, sealing automatic welding, pipe butt, round container wind head welding and other circumferential welding. The principle of the controllable gas spring is to fill the sealed pressure cylinder with an inert gas or a mixture of oil and gas, so that the pressure in the chamber is several times or several times higher than the atmospheric pressure, and the cross-sectional area of the piston rod is smaller than the cross-sectional area of the piston. The resulting pressure differential effects the movement of the piston rod.