Pneumatic file

Pneumatic boring tools are used in the hardware industry such as die-casting and stamping, trimming and chamfering deburring. Small in size and light in weight, it can complete the general die-casting, honing and cutting of stamping parts, as well as the groove trimming and honing processing of various aluminum and copper materials.

It is suitable for grinding and polishing of hardware, plastic, electronics, resin, die-casting, furniture, circuit board and other industries. It has strong strength, comfortable hand feeling and convenient operation.

Features:

1. Small size, light weight, easy to carry and easy to use.

2. The chassis is elastically designed to facilitate multi-directional grinding and polishing, reducing the loss of parts.

3. Grip design is easy to hold and operate according to the rules of the palm.

4. Eccentric double-track design to avoid ringing of the machine.

5. The parts are easy to install and it is easy to change the sandpaper.

Product Usage:

Applicable industry: It is suitable for grinding and polishing of hardware, plastic, electronics, resin, die-casting, furniture, circuit board and other industries. It has strong strength, comfortable hand and convenient operation.

Applicable fields: It is suitable for metal die-casting and stamping parts in aluminum alloy, zinc alloy, etc. It is the best tool for flat grinding and polishing of panel furniture and solid wood furniture.

Note editing

1. Before carrying out the work, use special oil to fully moisturize the cylinder, blades, bearings, etc., to reduce the friction of the fuselage during operation.

2. Clean the moisture and impurities inside the tool in time to avoid deposits and damage the tool.

3. When the tool is not applicable, the dust on the tool should be removed and placed in a special collection box to extend the life of the tool.

4. Regularly inspect the parts of the fuselage and replace the damaged bearings and front guide wheels in time.

5. The working time should be within the load range of the tool and the tool should not be overloaded.

6. When using the tool, the principle of handling should be followed to avoid unnecessary damage to the fuselage.

7. After the tool is connected to the air supply, the tool should be allowed to move freely for about 1 minute to allow the tool to enter normal operation.