Pneumatic Punching maching

Pneumatic punching machine

The high-pressure gas generated by the compressor is used to deliver the compressed gas to the solenoid valve through the pipeline, and the operation of the solenoid valve is controlled by the foot switch to control the operation and return of the cylinder, thereby achieving the purpose of punching. The compressed air can be stored in the gas storage tank and taken away at any time, so the motor has no idling energy waste. The use of the cylinder as the working component and the use of the solenoid valve as the control element make the structure of the machine simpler, the failure rate is low, the safety is high, the maintenance is simple, the maintenance cost is lower, and the production efficiency is high. The 220V power supply is used to realize the control of the solenoid valve, and the operation is simple and convenient.

Equipment principle

1. With compressed air as the power source, it is highly efficient and easy to operate, with simple structure and minimal maintenance.

2. There is no noise generated when the hydraulic system is in standby, which can save power consumption and reduce production costs.

3. The height, speed, stroke, pressure and stamping time can be adjusted arbitrarily according to different products or molds.

4. With anti-rotation guide bar and guide plate, the precision is high, and it can adapt to high-speed precision punching.

5. Optional two-hand control or pedaling. Ensure the personal safety of the operator.

6. Adopt microcomputer control system, the mode can be manual, semi-automatic and fully automatic.

Heating molds, temperature control and pressure sensors can be added.

Simple structure and pneumatic technology, one air compressor can be used for multiple pneumatics at the same time.

The punching machine works more energy-efficient than the electric punching machine. Reduce power consumption. Simple operation, safety

The full type is high, and the foot switch is used to control the solenoid valve. The structure is simple, the failure rate is low, and the production efficiency is improved.

Application range

Adapt to electronics, instruments, instruments, cameras, jewelry, hardware and clothing, shoes and hats industry; can cut, punch, blank, form, bend, rive, etc. for thin plates, strips, coils; suitable for non-ferrous metals Processing of plastic parts, etc.

Background technique

At present, in the punching field of various metal and non-metal pipes and plates, most of them are completed by electric punching machines. The electric punching machine not only has a large noise pollution environment, but also its complicated structural components determine its high cost, difficult maintenance and high maintenance cost. The body is heavy and consumes a lot of power. The operation is complicated, the failure rate is high, and the safety hazard is large. Pneumatic punching machine is relatively hygienic and clean! The use of advanced optoelectronic protection technology can achieve a significant increase in safety performance, computer counting and program coordination, can achieve unattended processing flow, greatly improving the efficiency of work.

Principle of action

The high-pressure gas generated by the compressor is used to deliver the compressed gas to the solenoid valve through the pipeline, and the operation of the solenoid valve is controlled by the foot switch to control the operation and return of the cylinder, thereby achieving the purpose of punching. The compressed air can be stored in the gas storage tank and taken away at any time, so the motor has no idling energy waste. The use of the cylinder as the working component and the use of the solenoid valve as the control element make the structure of the machine simpler, the failure rate is low, the safety is high, the maintenance is simple, the maintenance cost is lower, and the production efficiency is high. The 220V power supply is used to realize the control of the solenoid valve, and the operation is simple and convenient.