Selection of rack swing cylinder

Taking the rack swing cylinder as an example, the following describes the size table that must be known when selecting msza type of rack swing cylinder:

Piping and speed control method of rack swing cylinder:

(1) use 1 3-position medium pressure solenoid valve or 2 3-way solenoid valves.

(2) exhaust throttle speed control valve is generally used for two ports, and inlet throttle speed control valve is used for other two ports.

(3) the pressurization port of each action and the speed control valve for speed adjustment have clear parameter specified range.

What are the advantages of the swing cylinder made by SMT:

1. There are no restrictions on the way of installation. It can be installed at will according to the working condition of the customer, which is convenient and easy to operate. It is necessary to prevent the center of gravity of the load in the horizontal direction at the rotating shaft from being inconsistent with the rotating center.

2. The breathing port is usually not blocked. There is a breathing hole in the middle stop part. As the piston moves forward and backward, it repeatedly inhales and exhausts air from the outside to ensure the smooth operation of the cylinder.

3. The middle position can be adjusted at will. Generally, when the table is running, there is a clearance in the direction of rotation. The larger the action is, the more the clearance will be. As long as the middle position is adjusted at any time, it can be avoided.