Six principles to follow when purchasing solenoid valves
Sep 17, 2019
(1) Select auxiliary functions according to environmental requirements: explosion-proof, non-return, manual, waterproof fog, water shower, diving;
1. Explosive environment: The solenoid valve of the corresponding explosion-proof grade must be selected.
2, open-air installation or dusty occasions should be waterproof and dustproof (protection level is above IP54).
3. When the fluid in the pipe has a backflow phenomenon, a solenoid valve with a check function can be selected.
4. For the fountain, a submersible solenoid valve must be used (protection level is above IP68).
5. When manual operation of the solenoid valve is required, the solenoid valve with manual function can be selected.
(B), coil selection: voltage specifications should be preferred to use AC220V, DC24 is more convenient.
(3) Selecting the solenoid valve according to the pressure parameters: principle and structure
1. Working pressure: If the working pressure is low, the direct or step-by-step direct-acting principle must be used; the minimum working pressure difference is 0.04Mpa.
2. Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined according to the nominal pressure of the pipeline.
(4), according to the length of continuous working time to choose: normally closed, normally open, or sustainable power.
1. When the solenoid valve needs to be opened for a long time, and the duration is longer than the closing time, the normally open type should be used.
2, but some working conditions for safety protection, such as furnace and kiln flame monitoring, can not be selected for normal opening, should be selected for long-term power-on type.
3. If the opening time is short or the opening and closing time is not much, then the normally closed type is selected.
(5) Selecting the solenoid valve according to the fluid parameters: material, temperature group
1. Corrosive fluid: Corrosion-resistant solenoid valve and all stainless steel should be used; edible ultra-clean fluid: food grade stainless steel solenoid valve should be used.
2, fluid state: large to have a gaseous state, liquid or mixed state, especially when the caliber is larger than DN25 when ordering must be distinguished.
3. Fluid viscosity: Usually it can be arbitrarily selected below 20cSt. If it exceeds this value, high viscosity solenoid valve should be used.
4, high temperature fluid: to choose the use of high temperature resistant electrical materials and sealing materials made of solenoid valves, and to choose the type of piston structure.
(6) Selecting the solenoid valve according to the pipeline parameters: diameter specification (ie DN), interface mode
1, interface mode, general > DN50 to choose the flange interface, ≤ DN50 can be freely selected according to user needs.
The diameter (DN) size is determined by the internal pipe diameter or flow rate requirements.






