Solenoid valve noisy solution

1. The specific office environment standards for solenoid valve products are not within the scope of solenoid valve products.

For example, working temperature, material temperature and characteristics, natural environment and pressure, etc., it will be very unstable when there is no solenoid valve in the working range, and it is very easy to cause the damage and destruction of parts and components, and excessive noise, etc. situation. The solution is to dismantle and replace solenoid valves suitable for natural environmental standards.

2. Destruction of solenoid valve parts, such as yellow bombs.

After long-term application of solenoid valve products, all parts and components will also appear normal damage or destruction, which will cause the operating state of the solenoid valve to be unstable and cause noise. The solution is to repair or replace the damaged parts of the solenoid valve.

3. The working voltage is too low

If the operating voltage is too low, the operating state of the solenoid valve is abnormal, causing noise, and the operating voltage can be adjusted.

4. The working pressure of the system software is too high

The working pressure of the system software is too high, and the solenoid valve is not within the working range. This leads to instability in the operation of the solenoid valve and causes noise and other conditions.

5. There are external residues in the control system, and there are external residues on the valve core or on the surface of the plunger pump nut

The entry of external residues will cause instability in the operation of the solenoid valve, endanger all the normal operation of the solenoid valve, and cause noise during the operation of the solenoid valve. The solution is to check and clean up the residue of the solenoid valve.

6. Lack of lubrication proportional solenoid valve

The long-term application of solenoid valve products leads to lack of lubrication in the parts of the solenoid valve, and physics sliding friction causes excessive noise of the solenoid valve. The solution is to add lubrication to the shaft and other components of the solenoid valve.

7. The solenoid valve parts are loose

Loose parts will cause the solenoid valve to have a firm structure, so the solenoid valve will vibrate under working conditions. The greater the vibration, the greater the noise. The solution is to terminate the operation of the solenoid valve, check and tighten the loose parts of the solenoid valve.