Structure of oil shock absorber

Structure of oil shock absorber

1. The main structure of the oil pressure buffer is composed of body, shaft, bearing, inner pipe, piston, hydraulic shaft and spring. When the shaft is impacted by external force, it will drive the piston to squeeze the hydraulic oil of the inner pipe. After the hydraulic oil is pressurized, it will be discharged one by one from the oil drain hole of the inner pipe. At the same time, the hydraulic oil discharged from the inner pipe will also return to the inner pipe from the oil return hole of the inner pipe; When the external force disappears, the spring springs the piston back to the starting point and waits for the next action. According to this principle, the oil buffer will be able to balance the moving objects and stop them effectively.

2. Eliminate the impact of vibration and collision damage caused by non mechanical movement.

3. Greatly reduce noise and provide a quiet working environment.

4. Speed up the mechanical actuation frequency and increase the production capacity

5. Efficient production of high-quality products.

6. Extend mechanical life and reduce after-sales service.