Two position two-way solenoid valve

Apr 16, 2020

Two position two-way solenoid valve


1. We want to order DF series solenoid valve with flow aperture of 50mm, nozzle aperture of G2 ", standard voltage of AC220V, normally closed, with manual device. The correct order code is df-50 AC220V.


2. We want to order DF series solenoid valve with flow diameter of 200mm, flange connection, standard voltage of DC24V, normally open. The correct order code is df-200f-k DC24V.


If the cleanliness of the fluid is not high, especially if there are particles and ribbons mixed in, the filter should be installed in front of the valve


Working principle


Function: to control the direction of pipeline medium, so as to control the valve switch.


Applicable media: water, steam, oil, gas, air, kerosene, gasoline, diesel and other media.


Applications: chemical, petrochemical, petroleum, paper, mining, electric power, liquefied gas, food, pharmaceutical, water supply and drainage, municipal, mechanical equipment supporting, electronic industry, urban construction and other fields.


Normally open and normally closed solenoid valves:


◆ normally open type: it is closed when the power is on, which is suitable for the pipeline condition with less closing times and the medium is normally open;


◆ normally closed type: it can be opened when the power is on, which is suitable for the condition that the opening times are few and the medium does not need to flow frequently.


Installation precautions:


(1) During installation, the arrow on the valve body shall be consistent with the flow direction of medium;


(2) It shall not be installed in the place with direct water dripping or splashing, and the solenoid valve shall be installed vertically upward.


(3) The solenoid valve shall ensure normal operation within 15% - 10% fluctuation range of the rated voltage.


(4) After the installation of the solenoid valve, there shall be no reverse pressure difference in the pipeline. It needs to be electrified several times to make it warm before it can be put into use.


(5) Clean the pipeline thoroughly before installing the solenoid valve. The introduced medium shall be free of impurities. Filter is installed in front of the valve.


(6) In case of failure or cleaning of solenoid valve, bypass device shall be installed to ensure continuous operation of the system.