If You Choose The Corresponding Pneumatic Cylinder According To Your Own Product?

Pneumatic Cylinder is completely evasive as long as the appropriate method is used. Pneumatic technology is the medium of mechanical compressed air transmission and control professional technology. It has the advantages of energy saving, pollution-free, high efficiency and low cost. It is safe, reliable and simple in structure, and is widely used in various machinery and production lines. In the past, production lines, such as pneumatic systems and components for automobiles and tractors, were designed and manufactured by the factory. Therefore, in general, the number of pneumatic components is small. This is one of the important factors for the continued prosperity of the pneumatic components market.

Excessive tightening torque, mounting screws, mounting accessories and sensor switches can be quickly disassembled. Insufficient tightening torque, the position where the inductive switch is installed may offset the star.

With internal and external leaks and no-load performance studies, including three, Pneumatic Cylinder Pneumatic Cylinder appearance, Pneumatic Cylinder and piston rod surface should be free of scratches, no porosity, trachoma end caps; Pneumatic Cylinder does not allow external leakage except for the rod end The inner leakage and outer leakage of the rod end should be less than (3 + 0.15D) ml / min, (3 + 0.15d) ml / min; Pneumatic Cylinder will be in no load state, which is low running, how much is crawling speed , the speed is as low as possible.

4 Pay attention to the mounting form and Pneumatic Cylinder size, the mounting size can make the manufacturer of pneumatic components. Since Pneumatic Cylinder is generally not available, it is recommended to use a standard type to reduce lead times.