Stainless Steel SI Pneumatic Cylinder
Stainless steel SI series pneumatic cylinder uses stainless steel as raw material, which is used in the case of steam or high temperature. At the same time, it has good corrosion resistance and long working life.
Stainless steel SI series pneumatic cylinder uses stainless steel as raw material, which is used in the case of steam or high temperature. At the same time, it has good corrosion resistance and long working life.
Ordering Code:
Specification:
Bore size (mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
Fluid | Air | ||||||||
Action | Double acting, Single/Double rod | ||||||||
Minimum operating pressure | 0.1 MPa | ||||||||
Maximum operating pressure | 1.0 MPa | ||||||||
Proof pressure | 1.5 MPa | ||||||||
Ambient and fluid temperature | -20 to 80°C (No freezing) | ||||||||
Cushion | Adjustable air cushion at both ends | ||||||||
Lubrication | Non-lube | ||||||||
Piston rod dia. | 12 mm | 16 mm | 20 mm | 25 mm | 32mm | 40mm | 40mm | ||
Piston rod thread | M10x1.25 | M12x1.25 | M16x1.5 | M20x1.5 | M27x2.0 | M36x2.0 | |||
Port size | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | ||||
Main Dimensions:
![K$RI[QH@`NML]GRRX$3BMYT](/Content/uploads/2020480534/20200415162007fc9b4477c8c64bf795c81667edba92b4.png)
Where to be used:
Features:
1.Small size, light
2.Strong resistance to lateral load
3.High torque resistance
4.High precision without rotation
5.Guide rod bearings can be selected for sliding bearings or ball bearings
6.Convenient installation
7.Two face take over position to choose.
Hot Tags: stainless steel si pneumatic cylinder, China, manufacturers, suppliers, factory, customized, low price, made in China
Send Inquiry
