Impact Vibrator Air Hammer

•　Single-impact type, each action produces a shock wave.
•　impact and shock interval can be adjusted according to requirements.
•　By using the principle of energy storage, the instantaneous force of the hammer is improved, and the impact force of the air hammer is improved.

Send Inquiry

Feature:

Air Hammer, also known as air percussion hammer, the force of impact is characterized by large, simple structure, easy to use. Powder materials can be an effective solution to sticky wall, hanging materials, blockage, bridges and so on. The impact force, noise, a variety of models to choose from. Impact and action time can be controlled, easy installation. In explosion-proof, multi-dust, humidity and other environment. Widely used in fertilizer, chemical, food, medical care, pesticides, glass, cement and other industries. Aluminum structure, high intensity, stand-alone type / intensity of the impact of large, light weight, adjustable shock interval.

How to work:

Air Hammer internal - strong magnetic magnets, in the action before the end, the magnetic hammer close to the magnetic substrate. When the three power solenoid valve, intake air pressure is more than fitting magnetic, the magnetic hammer from the substrate speed to the bottom of the shock. Attacks, three solenoid valve power, the product inside the gas removed, the hammer with spring back to its original position. Air hammer impact force delivered to the pipe or barrel warehouse wall, so that a smooth flow of materials.

When to Use:

The air hammer output can be used only for a small range for a single impact, the least impact on other equipment ,the impact will not cause the high moisture content of raw materials to have water precipitation or mixture of raw materials for the separation ,it commonly used in tank cleaning, pipeline clogging or elbow, high water content or mixed raw materials or low proportion of material tank

Warning:
After the installation of the hammer, be sure e to install the Inhaul cable on the body to prevent falling off.

Note:

1 in the installation of the body, please wear a helmet, safety shoes, safety belt, work under the safety environment.
2 When the installation plate is relatively thin, please weld the reinforcement plate, or because of the impact may cause the installation site damage.
3.For welding reinforcement, make sure there is no gap between the reinforcement plate and the hopper ,the exhaust reserved about 10mm, in order to discharge the air ,then the impact force can be fully transmitted .In order to avoid the hopper of damage, please be sure to weld several layers

4. In order to prevent falling off, please use the cable to lift the body and fix it, otherwise it will cause the bolt loosening and falling off
5 When the body and the flange are fixed with bolts, please install the spring washer up and down, and tighten the fastening torque and check regularly

6 piping with air filter before, if there is garbage or dust mixed, may lead to poor operation.
7 do not exceed the required strike force when used, otherwise it may lead to the damage of the bunker or installation.
8 continuous blow, please keep the time setting of more than one second, such as less than 1 second may lead to the occurrence of misoperation.
9 please make sure that the striking surface of the mounting flange must be a solid surface. If necessary, please weld reinforced rib

Steel Air Hammer 5

Hot Tags: impact vibrator air hammer, China, manufacturers, suppliers, factory, customized, low price, made in China