Application scope and key points of high-pressure solenoid valve
Jun 25, 2021
High-pressure solenoid valve is a common solenoid valve product, divided into two basic principles of direct-acting type and dominant type. It is widely used in power engineering, electronic devices, mechanical equipment, chemical plants and other industries. Application Scope: Aerospace, National Defense and Military Products, China's Nuclear Industry, Ship Heavy Industry Machinery, Petrochemical Industry, Power Engineering Weaponry, Medical Equipment, Furnace, Drying Equipment, Security Equipment, Stage Special Effects, Ventilation and Air Conditioning, Cleaning Machinery, Electroplating Process Spraying , Canned measurement verification, equipment manufacturing, food industry, water treatment equipment high-pressure automatic control system.
Application key points of high pressure solenoid valve
1. Please refer to the instructions for use of the product before installation to see if it conforms to your application regulations.
2. The pipeline should be cleaned and tidy before application. If the material is not cleaned, a filter device should be installed to avoid the residue from hindering the normal operation of the gate valve.
3. The solenoid valve after long-term use should be easy to use after clearing the solidification; when disassembling, the parts should be placed in order before returning to normal installation.
4. Solenoid valves generally work unilaterally and cannot be reversed. The upward arrow of the valve is the direction of the fitness exercise of the pipeline liquid, which must be consistent.
5. Solenoid valve should be heated when it works again in the freezing field, or set up heat insulation countermeasures.
6. The solenoid valve is installed at the general level of the oil circuit board, and the solenoid coil is vertically upward. Some products can be installed at will, but it should be vertical when the standard permits to improve the service life.
7. After the magnet coil transformer grounding wire (radio frequency connector) is connected, it should be determined whether it is sturdy, and the contact points of the connected electrical components should not vibrate. Looseness will cause the solenoid valve to not work. Solenoid valves that continue to be manufactured are conducive to maintenance and do not endanger manufacturing.
