Basic characteristics and types of pneumatic components

About features:

1. Easy to use

As the working medium, air can be found everywhere, with convenient sources. After being used, it can be directly discharged into the air, without polluting the environment. It is possible to set less or no return pipes.

2. Convenient system assembly

The use of quick connector can be very simple piping, so the system assembly, maintenance and component replacement is relatively simple.

3. Good speed

Quick action, quick response, can achieve the required pressure and speed in a short time. Under certain overload operation, it can also ensure the system work, and it is not easy to overheat.

4. Reliable use

Compressed air will not explode or catch fire, and expensive explosion-proof facilities are not needed in inflammable and explosive places. Cocoa is used in inflammable, explosive, dusty, radiation, strong magnetism, vibration, impact and other harsh environments.

5. Convenient storage

The pneumatic components have high self holding capacity, and the compressed air can be stored in the air storage tank and used at any time. Even if the compressor stops running and the air valve is closed, the pneumatic system can still maintain a stable pressure, so the continuous operation of the compressor is not required.

6. Long distance transmission

Because the air viscosity is small, the flow resistance is small, and the pressure loss along the pipeline is small, which is conducive to the centralized supply of media and long-distance transportation. No matter how far or near the air is, it is very easy to be transported by pipeline.

7. Overload protection

Pneumatic mechanism and working parts can be overloaded and stop, so there is no danger of overload.

8. cleaning

Pneumatic components are basically free of pollution, which is very important for occasions requiring high purification and no pollution, such as food, printing, wood and textile industry. Pneumatic components have unique adaptability, superior to hydraulic, electronic and electrical control.

About types:

Select the type correctly according to the work requirements and conditions. It is required that the air cylinder reach the stroke end without impact phenomenon and impact noise; it is required to select the buffer cylinder; it is required to be light in weight; it is required to select the light cylinder; it is required to have narrow installation space and short stroke, and it is required to select the thin cylinder; it is required to have transverse load, and it is optional to have the air cylinder with guide rod; it is required to have high braking accuracy, and it is required to select the locking air cylinder; it is not allowed to rotate the piston rod, and it is optional to have the air cylinder with the function of rod not rotating; In corrosive environment, corrosion resistant cylinder should be selected. In severe environment such as dust, it is necessary to install dust cover at the extension end of piston rod. When there is no pollution, it is required to select oil-free or oil-free lubricating cylinder.

This is the introduction of the relevant characteristics and basic types of pneumatic components. Because of these advantages, the equipment is loved and used by many people. If you want to buy, welcome to our website.