Causes and solutions of air leakage of rodless cylinder

Maintenance mode of air leakage of rodless cylinder

First, find out the cause of air leakage:

1. Valve leakage: in this case, the cylinder compression force is insufficient and the combustion is poor

2. Seal leakage: in this case, the seal ring, inner cylinder belt and sliding block are worn or broken, or the cylinder copper is faulty.

3. Similar knocking sound: This is a serious air leakage. You can directly contact the manufacturer for maintenance.

The maintenance of rodless cylinder is very important. If the maintenance is good at ordinary times, the maintenance times are less.

1. Cherish the cylinder free cylinder purchased by yourself, maintain and wipe it regularly to prevent particle dust, and keep the equipment clean;

2. Do not overload the use of rodless cylinders, and do not use rodless cylinders in violation of regulations; Non violent use of rodless cylinders;

3. In case of failure, be patient to eliminate, and do not use brute force or violence; Solve the problems in time;

4. The fine parts shall be carefully maintained. The seals and parts shall not be knocked by blunt tools or sharp objects. The equipment shall be maintained patiently:

5. Vulnerable parts shall be ready at any time. Damaged parts can be replaced in time. The drawing update speed is fast, which can greatly shorten the maintenance time limit;

6. Usually observe the equipment operation to prevent equipment failure.

7. Unplug the power supply in time, and the equipment also needs to rest;

8. Only by maintaining the rodless cylinder can the equipment last for a long time.