How to choose the pneumatic control valve from the functional consideration
Apr 30, 2021
In the process of industrial production, especially in the control link of pneumatic system, a good control valve is needed. In the process of selection, what functional issues should we pay attention to?
1. Regulation function
① The control valve should be stable; ② Small opening has good regulation performance; ③ Select the required flow characteristics; ④ Meet the adjustable ratio; ⑤ Small resistance and large flow ratio (the ratio of rated flow parameters and nominal diameter of control valve); ⑥ Adjust the speed.
2. Leakage and cut off pressure difference
These are two inseparable and interrelated factors. The leakage should meet the process requirements, and the reliability of the sealing surface should be protected; The cut-off pressure difference (the pressure difference when the valve is closed) must be put forward (unfortunately, this parameter is not included in the calculation specification of regulating valve of many design institutes), so that the selected regulating valve has enough output force to overcome it, otherwise it will lead to the selection of larger or smaller actuator.
3. Anti blocking
Even if it is a clean medium, there is also a problem of blockage, which is that the unclean things in the pipeline are brought into the control valve by the medium, causing blockage. This is a common fault, so the anti blocking performance of the control valve should be considered. Generally, the anti blocking performance of the angle stroke control valve is much better than that of the straight stroke control valve, so the angle stroke control valve will be used more and more in the future.
4. Corrosion resistance
It includes erosion resistance, cavitation resistance and corrosion resistance. It mainly involves the selection of materials and the service life of the control valve, at the same time, it also involves the economic problems. The essence of this problem should be that the selected valve has good corrosion resistance and reasonable price. If you can choose all PTFE valve, you should not choose all corrosion resistant alloy control valve; If the angle high-pressure control valve with good anti cavitation effect and simple structure can be selected (to meet the service life of about two years), other high-pressure control valves with complex structure and expensive price should not be selected.
5. Withstand voltage and temperature
This involves the selection of the nominal pressure and working temperature of the control valve. In terms of pressure resistance, if the pressure is high, it is not difficult, mainly because the pressure difference will produce cavitation; In terms of temperature resistance, it is usually very easy to solve the problem below 450 ℃, and it is not difficult to solve the problem between 450 ℃ and 600 ℃, but when it is above 600 ℃, the contradiction will be prominent; When the temperature is 80 ℃, soft sealing material is usually not recommended for shut-off control valve, so hard sealing shut-off should be considered.
6. Weight and appearance
This problem is very intuitive, must be good appearance, light weight control valve is welcomed by the manufacturers. Here to change a prejudice that the control valve is a "big big thick", heavy or poor appearance is not great. Now we attach great importance to it, so that the control valve should have the characteristics of miniaturization, lightweight, instrumentation.






