How to maintain the air source processor correctly?

The central task of maintenance work is to ensure the supply of clean and dry compressed air to the pneumatic system, the air tightness of the air source processor, the necessary lubrication of oil mist lubricating elements, and the specified working conditions of the air source processor, so as to ensure that the pneumatic actuator works according to the predetermined requirements.

  It is better to select the specification of oil replenishment once a week for the oil mist sprayer. When replenishing oil, pay attention to the reduction of oil quantity. If the oil consumption is too small, readjust the oil dripping amount. After the adjustment, the oil dripping amount is still reduced or no oil dripping. Check whether the inlet and outlet of the oil mist eliminator are installed reversely, whether the oil passage is blocked, and whether the specifications of the selected oil mist eliminator are appropriate. The monthly and quarterly maintenance work shall be more careful than the daily and weekly maintenance work, but it is still limited to the scope that can be checked externally. Carefully check the leakage, tighten the loose screws and pipe joints, check the quality of the air discharged from the air source processor at the terminal, check the flexibility of each regulating part, and check the correctness of the indicating instrument.