Installation of pressure gauge
Oct 08, 2019
Pressure gauge national standard "General Pressure Gauge" GB/T1226-2001 4.1.2 meters are divided into direct installation pressure gauge, mounted (disc) pressure gauge and convex (wall) pressure gauge according to the thread joint and installation mode.
1. The installation position of the pressure gauge should meet the requirements of the installation state. The dial should not be placed horizontally, and the installation position should be easy for staff to observe.
2. The distance between the pressure gauge installation and the pressure point should be as short as possible, so as to ensure the integrity of the sealing and prevent leakage.
3. Buffers should be installed at the front end of the pressure gauge installed; cut-off valves should be installed under the gauge for easy inspection; filters, buffers and pressure stabilization can be used when the medium is dirty or has pulse pressure.






