Medium suitability of solenoid valve

1. The fluid in the pipeline must be consistent with the medium marked in the selected solenoid valve model.

2. The temperature of the fluid must be lower than the marked temperature of the solenoid valve.

3. The solenoid valve allows the liquid viscosity to be generally below 20CST, and it should be noted if it is greater than 20CST.

4. When the working pressure difference in the pipeline is less than 0.03Mpa, it should be selected for direct-acting or step-wise direct-acting; when the working pressure difference is greater than 0.03Mpa, a pilot type can be selected. The working pressure should be less than the maximum working pressure marked on the solenoid valve.

5. Generally, the solenoid valves work unidirectionally, so pay attention to whether there is reverse pressure, if necessary, install a check valve.

6. Solenoid valve has high requirements for medium cleanliness, it is best to install a filter in front of the valve