Pneumatic trap
Aug 15, 2019
Pneumatic trap
Pneumatic trap is a new generation of steam trap designed and produced according to the hydrophobicity of thermal power plant equipment. The product is close to the linear circulation design, reducing flow resistance, secondary throttling principle, reducing erosion and improving life.
Product description
The valve core and valve seat are made of solid carbide, closed inner leakage <=VI grade, detachable middle cavity seal design, to prevent leakage, easy maintenance, etc. It can also be used in flammable and explosive places, according to the control system or Adjust the signal of the instrument, cut off or open the valve to achieve the requirements for the use of the controlled parameters. Therefore, it is widely used in remote control of industries such as thermal power plants.
Characteristics
Pneumatic steam trap is divided into positive and negative action, its nominal diameter class DN (MM) is 20~100; nominal pressure class PN is 150lb (2.00MPa) and other grades; gas source pressure (MPa)0 14-0. 4; signal range Pr (KPa) 20-100; 40-200; leakage is almost similar to 0 leakage. The product is available in a variety of sizes.
The pneumatic trap consists of a new series of pneumatic diaphragm actuators and a Y-type trap (Fig. 1). The Y-type trap is a special-structured regulating valve body. The two ends are welded and suitable for specific piping.
The actuator of the pneumatic trap has two forms of action: positive and negative; when the signal pressure increases, the push rod extends out of the diaphragm chamber and acts as a gas-closed type. When the signal pressure increases, the push rod retreats into the membrane chamber, which is called a reaction, and cooperates with the valve to form an open type.
principle
When the signal pressure of the pneumatic trap is input into the membrane chamber, a thrust is generated on the diaphragm, the spring is compressed, the push rod is moved, the valve stem is driven, and the flow area between the valve core and the valve seat is changed until the reaction force and signal pressure of the spring The thrust acting on the diaphragm is balanced to achieve the purpose of automatically adjusting the process parameters.






