Points for attention in use of booster cylinder

A: Keep clean

Before connecting the supercharging cylinder to the gas circuit, please remove the dust and other impurities in the pipeline and components, so as not to reduce the service life of the supercharging cylinder.

B: Pay attention to the working environment of booster cylinder

The temperature in the working environment of the cylinder has been set at the time of design. If the working environment is changed due to the need of work, and the temperature exceeds, the relevant technical personnel of the booster cylinder shall be contacted for treatment.

C: Do not add other hydraulic oil without permission

The hydraulic oil medium used in the design of booster cylinder is VG68? Anti-wear hydraulic oil. It is not allowed to use other liquid medium (such as oil, water, etc.) without authorization.

D: Be sure to follow the procedure

The action program must work according to the action program of the gas circuit assembly drawing, that is, pre pressure action - pressure boosting action - pressure relief - pre pressure reset.

Pay attention to maintenance and check the operation of booster cylinder frequently.

When the booster cylinder is used for more than 500000 times or more than half a year, it is recommended to replace all the hydraulic oil in the cylinder once to improve the service life and service life of the cylinder.