The installation of pneumatic solenoid valve producrs has the following points of attention
Nov 11, 2019
The installation of pneumatic solenoid valve products has the following points of attention:
Pneumatic solenoid valves are widely used in chemical production. They are usually used to be installed on the pneumatic circuit of pneumatic actuators to control the switching of valves by controlling the opening and closing of the gas circuit. However, in practical engineering design applications, instrument designers who are self-controlled are usually not fully aware of the basic knowledge of solenoid valves and their aerodynamic symbols. This is a great choice for selecting and designing a suitable gas path map. obstacle.
Pneumatic solenoid valves are pneumatic components used to control compressed air pressure, flow direction and other functions.
The installation of solenoid valve products has the following points to note:
1. For the installation of solenoid valve products, first of all, it is necessary to ensure that the working range conditions of the pneumatic solenoid valve products are consistent with the actual working place. Do not force the installation beyond the working range of the solenoid valve product, otherwise the solenoid valve may be damaged and accidental. The situation has happened. The working conditions that need to be noted mainly include the power supply voltage, pressure range, differential pressure range, media properties, environment and operating temperature of the work site. Different working environments have corresponding solenoid valve products corresponding to them, users can choose products suitable for the working environment, do not force the installation of unsuitable solenoid valve models.
2. The installation direction of the solenoid valve product should pay attention to the main components of the solenoid valve. The installation of the coil and solenoid valve coil should be installed vertically on the pipeline, and the pipeline should be kept at the level of the ground. Otherwise, the solenoid valve product is prone to failure when working, such as unable to work. However, in order to meet the special working environment, there are solenoid valve products that can be installed sideways. The specific model users can consult the sales personnel of the force code valve industry.
3. Since some solenoid valve products are related to electromagnetics due to their working principle, the requirements for the working environment are high, such as the cleanliness of the interior and the pipeline, so the user needs to wash and purge the pipeline and the interior during the actual installation. In order to ensure the internal and pipeline cleaning, so that impurities do not affect the normal operation of the solenoid valve products. In addition, in order to ensure that there is no foreign matter entering the solenoid valve product during operation, it is necessary to install a filter and a filter in the pipeline.
4. Since the solenoid valve products are often used with fluid conveying equipment such as pumps, in the actual work, there will be water hammer phenomenon, then the pneumatic components are selected http://www.qidongqg.com/products/186 For .html solenoid valve products, users need to use solenoid valve products with waterproof hammer performance.
5. If the solenoid valve product needs to work for a long time, the user needs to install the bypass when actually installing, so that the solenoid valve product can be easily maintained when it works and fails.
6, in addition to the vacuum line and special circumstances, the general solenoid valve products must pay attention to the installation direction of the solenoid valve when installing. Generally, it is marked on the valve body of the solenoid valve, a mark similar to an arrow, →. This represents the direction of transport of the media.
7. Normally open and normally closed solenoid valves can not be used interchangeably. This will cause the solenoid valve coil to burn out and reduce the service life of the solenoid valve. Therefore, the user should not let the solenoid valve be in the long time under actual use. Powered state.






