What are the differences between multi position cylinder and double force cylinder?

1.The difference between multi force cylinder and multi position cylinder in product selection:

①.Multiple force cylinder: the cylinder stroke size, multiple, working frequency, stroke need to be adjustable, whether magnetization, internal and external teeth and other parameters should be provided.

②.Multi position cylinder: provide specification, thread type, buffer, position sensing, position mm Z1, position mm Z2 and temperature resistance strength.

2.The working principle of multi position cylinder is different from that of multi force cylinder

①.Multiple force cylinder: with compact length and size, multi-layer superposition, multi piston force at the same time, double the output force of the cylinder. Using the same and the same pressure source, the output is several times of the same cylinder, the output is large, multi-layer piston combination, the output is multiple increase, suitable for short stroke high output oil-free operation occasions.

②.Multi position cylinder: this kind of pneumatic actuator with piston rod staying in multiple positions can be divided into series multi position cylinder and telescopic multi position cylinder. A 3-position or 4-position cylinder is composed of two independent cylinders with piston rod extending in opposite direction. Four working positions can be obtained by controlling the action and stroke of the cylinder. It can be accurately positioned by the stop at each position. When one end of the piston rod is fixed, the cylinder barrel will move, so the cylinder is connected with a flexible air pipe.

3.The difference between multi position cylinder and multi force cylinder in product performance:

①.Multiple force cylinder: connect 2, 3, 4, 5 cylinders with the same piston diameter and stroke length, multi-layer pistons are combined and superposed, at the same time, under the same air pressure, the output of ordinary cylinder can reach several times. Only one solenoid control is required.

②.Multi position cylinder: 6 positions, 2 ~ 5 cylinders with the same piston diameter but different stroke length in series, the stroke of each cylinder in the back row is greater than that of the cylinder in front of it, and the sum of all single strokes shall not exceed the total stroke. The multi position control can be realized by using multi position cylinder, and the control precision is different, and the control mode is different.