What are the main parameters required to order a miniature solenoid valve?

1. The smaller the itinerary, the greater the energy. Therefore, if it is a design plan to energy, it must be added to the itinerary. These two types are immediately related. Generally speaking, the greater the output power, The greater the energy, it is probably proportional. Therefore, when the output power is large to the necessary level, the pressure solenoid valve will be close to the magnetic saturation state, and the energy increase will be small.

2. If the resistor, current, and working voltage have the necessary changes, then the output power will not change, the wire package size will not change, and the energy will basically not change.

3. If the wire diameter of the silk-covered cable is changed, the resistor will also change, but the output power will always remain unchanged (P=U2/R; RU is changed so that P will not change). Energy will not change.

4. For the same wire diameter of the wire-covered cable, if the number of turns of the winding coil is increased, the energy will be reduced. This is also because the resistor has already been expanded, so its weakening of energy exceeds the increase in the number of turns of the coil. .

5. For the same resistor, if the pulse solenoid valve is increased (change the wire with a higher wire diameter), then the energy will also expand, but if the previous wire is already full, then the wire cannot be changed. If the wire is covered, not only the wire package will be too large, making it impossible to install it in the shell, so that it cannot be made into a solenoid valve for gas.