What are the main parameters required to order a small solenoid valve?

1. The smaller the itinerary, the greater the energy. Therefore, if it is a design plan to energy, it must be added to the itinerary. These two types are immediately related. Generally speaking, the greater the output power, The greater the energy, it is probably a positive correlation. Therefore, when the output power is large to the necessary level, the solenoid valve will be close to the magnetic saturation state, and the energy increase will be small.

2. If the resistor, current, and working voltage have the necessary changes, then the output power will not change, the wire package size will not change, and the energy will basically not change.

3. If the wire diameter of the silk-covered cable is changed, the resistor will also be changed, but the output power will remain unchanged (P=U2/R; RU is changed so that P will not change). Then the energy is also will not change.

4. With the same wire diameter of the silk-covered cable, if the number of turns of the winding coil is increased, the energy will be reduced. This is also because the resistor has already been expanded, so its weakening of energy exceeds the increase in the number of turns of the coil. .

5. For the same camshaft solenoid valve, if the number of turns of the winding coil is increased (change the wire with a higher wire diameter) then the energy will also expand, but if the previous silk covered wire is already full, then It is not possible to change the silk-covered wire. Not only will the wire package be too large, it cannot be installed in the housing, otherwise it cannot be made into a gearbox solenoid valve.