What is the relationship between the speed of cylinder lift and fall and how to control it?

Oct 15, 2019

1. It may be that the pressure of the air source decreases or the leakage of the pipeline leads to insufficient pressure, which leads to insufficient output of the cylinder.


2. It may be that the flow rate of air in and out of the cylinder decreases (the pipeline is blocked or knotted, the throttle valve is reduced, etc.)


3. It may be that the front and rear chambers of the cylinder are crossed with air, resulting in insufficient output.


4. It may be that the seal ring on the cylinder piston expands, which leads to the increase of internal friction.


The control of the cylinder here needs to pay attention to the compressibility of air. The friction between the piston and the cylinder wall and the friction between the piston rod and the dustproof ring at the extension end of the piston rod will affect the time control. The air with larger friction will be compressed again and the extension time will be delayed, because the friction force is not small and can be eliminated. The piston rod can be sensed by holding it in hand under the condition of gas.