What precautions should be taken in the installation of rotary cylinder
Sep 25, 2019
1. When adjusting the angle under the condition of air supply pressure, it should be ensured that the load will not fall within the range of rotation angle, and the adjustment will not exceed the range of rotation angle.
2. Angle adjusting screw should not rotate beyond the adjusting range, in order to prevent it from falling off and causing personal or device damage;
3. No reprocessing of products (such as expanding fixed throttle holes in piping interfaces, etc.);
4. Shaft joints used should have degrees of freedom to avoid eccentric stiffness.
5. The external limiter should be installed at the position away from the rotary shaft. If it is too close to the rotary shaft, the reaction force of the swing cylinder acting on the limiter will be added to the rotary shaft, which will lead to the damage of the rotary shaft or bearing.






