How To Choose The Right Pneumatic Cylinder?

There are many types and specifications of Pneumatic Cylinder. Many people don't know how to choose the appropriate Pneumatic Cylinder when purchasing Pneumatic Cylinder. Today, Pneumatic Cylinder manufacturers come to talk about how to choose the right Pneumatic Cylinder. Let's take a look. .

1. Buffer: no buffer, air cushion, rubber buffer, hydraulic buffer.

 2. Series: Select Pneumatic Cylinder series according to the characteristics: standard Pneumatic Cylinder, rodless Pneumatic Cylinder, slide Pneumatic Cylinder, mini Pneumatic Cylinder, triaxial cylinder, thin Pneumatic Cylinder, double shaft cylinder, pneumatic finger, swing Pneumatic Cylinder , non-standard custom Pneumatic Cylinder and so on.

3. Itinerary: Determine the moving distance of the work, and select the full stroke and reserve the trip considering the working conditions. According to the measurement of the itinerary, if it is pressed or withstand the workpiece, do not choose the full stroke, you can leave the stroke about 10mm. If you are pushing to a location, you can choose the full trip, but you need to add buffer.

4, magnetic induction switch: mainly to detect the Pneumatic Cylinder piston stroke, need to detect the piston, and to stop the position, you can choose the magnetic sensor switch, generally choose two.

5. Type: According to the operation mode, the type of Pneumatic Cylinder has double action, single-action spring press-in and single-action spring press-out. In the selection, the double-acting Pneumatic Cylinder is generally selected. Nowadays, the double-acting Pneumatic Cylinder is the most used. The single-acting Pneumatic Cylinder is not used in many places, and it will be used more in blocking Pneumatic Cylinder.

6. Bore diameter: Determine according to the relevant load, pressure and direction of action.

7. Installation method: front and rear flanges, tripods, single and double suspension ears, middle hinge shaft type, etc., according to the installation.