Research Competition Advances Soft-robotics Designs

Mar 31, 2020

The Soft Robotics Toolkit organization provides comprehensive resources to help students and researchers learn how to design, fabricate, model, and test soft robotic devices. It grew out of R&D work at Harvard University and Trinity College Dublin which focused on developing better instructional kits for hands-on design courses. Here’s an overview of this year’s notable projects.


3D silicone printer. The prize for Contributions in Soft Robotics Research was awarded for the 3D Silicone Printer, developed by the mLab Robotics team at Oregon State Univ. The 3D Silicone Printer reportedly adapts additive manufacturing to the soft robotics world. The group developed a micro-scale active mixing system, allowing practical 3D prints of two-part silicones.


Successful 3D printing eliminates the need for laborious and time-consuming molding methods like lamination casting, retractable pin casting, lost wax casting, and rotomolding. Such conventional processes restrict possible geometrical shapes, complexity and scale of soft components, and cause fabrication variability that limits repeatability.


But current 3D printers generally rely on harder materials and are not able to 3D print parts with internal structures as soft as their molded counterparts. To use viscoelastic materials and overcome strain limitations, researchers focused on direct ink writing (DIW) techniques. The team developed an extrusion system that combines aspects of prior research: an active mixer and controlled heat treatment.


The 3D printer, with an enhanced extruder mechanism, can fabricate soft functional robots with a two-part platinum cure silicone material. The layer-by-layer 3D DIW technique, in contrast to soft lithography and lost wax casting, requires no human intervention, introduces fewer dimensional errors, and reduces the fabrication time by more than 50%. The resulting 3D printed soft robots reportedly match or exceed the performance of their molded counterparts while being stronger and more reliable.


Laminar jamming. Runner up in the research category was Laminar Jamming Structures by the Harvard Biorobotics Lab, Harvard University. These structures can alternate between highly flexible and extremely rigid states when a pressure gradient is applied. Thus, soft robotic components with laminar jamming can selectively exhibit the mechanical properties of traditional rigid robots.


Laminar Jamming Structures (LJS) are composed of stacked layers of thin, flexible sheets enclosed in an airtight bag, which lets the components conform to complex shapes – such as for wearables in biomedical applications. The choice of material and number of layers in these structures also can be used to tune the desired stiffness and damping ability for specific applications.


Applying a vacuum to the airtight envelope actuates the unit. Increased frictional interaction causes coupling between the layers and dramatically increases the bending stiffness of the structure, which behaves like a unified beam. In addition, at high loads, shear stress causes layers to slip, which results in dissipation of energy through dry friction. In short, when vacuum is applied, the structures can transition from a very compliant state to a more rigid or shock-absorbent one.


The structures can be designed to pinch, wrap or grasp, depending on the vacuum pressure applied, or remain flexible when vacuum is off. Coupled with a soft actuator, they can lock in arbitrary shapes after being jammed. Laminar jamming can also effectively tune the dynamic responses of real-world robotic structures and systems. And the impact response of soft structures can be tuned to conserve or dissipate energy as desired.


Whole skin locomotion. The winners in the college category were students at the Franklin W. Olin College of Engineering, for Shape Memory Alloy Driven Whole Skin Locomotion. The design explored the feasibility of using whole-skin locomotion to facilitate continuous movement of an elongated fluid-filled torus. It used shape memory alloy as contracting rings that enables the prototype torus to inch forward.