Basic working principle and key features of water solenoid valve

The water solenoid valve is suitable for water or liquid as the working medium, and can be controlled by automatic technology or remotely control the conduction of water, oil, liquid and other working medium pipelines. Since this valve uses sealing gaskets, the cleanliness of the operating medium is greatly reduced, and it has the characteristics of fast opening and closing and superior firmness.

   There is a closed cavity in the relay, and there are buried holes in different directions. Each hole leads to a different oil pipeline. The cavity management center is a valve, and there are two solenoids on both sides. The magnet solenoid on which side is plugged in The oil circuit board will be attracted wherever it goes. After the movement of the oil circuit board is manipulated to block or expose different oil drain holes, and the oil inlet is open and closed, the gear oil will enter differently. The oil discharge pipe of the oil pipe then goes through the working pressure of the oil to push the piston rod of Yugang, the piston rod pushes the hydraulic cylinder, and the piston rod rod pushes the industrial equipment. In that way, the amount of current through the control of the electromagnetic coil controls the thermal motion of the molecules.

   Key features of water solenoid valve:

   The direct-acting pulse damper is selected to start without working pressure, which expands its application range

   The platform-type pulsation damper is selected to have a firm opening and closing structure and improve the application service life of the product.

   The use of plastic-encapsulated coils can develop the product's safety applications in many natural environments.