How To Choose The Model Of Pneumatic Cylinder?

Before selecting the Pneumatic Cylinder model, we must first confirm the location, function, installation requirements and field operation of the Pneumatic Cylinder, and then select the type: Mini Pneumatic Cylinder, Standard Pneumatic Cylinder, Thin Pneumatic Cylinder, Dual Axis Pneumatic Cylinder, Rodless Pneumatic Cylinder, etc.; to actually meet the Pneumatic Cylinder bore and stroke used in mechanical automation equipment.

Stroke: Refers to the small standard stroke that exceeds the moving distance of the workpiece as the basis for the determination of the stroke. For example, when the actual use requires Pneumatic Cylinder to move a workpiece to a large distance of 97mm, then the standard stroke series, more than 97mm, the standard stroke is 100mm, and this way is considered: between the piston rod and the retracted The error spacing, most of the thought that the exposure of the Pneumatic Cylinder itself is also the stroke, in fact, this is wrong, can not be calculated as the stroke.

Bore diameter: refers to the diameter of the inner wall of the cylinder. The main determining factor is the load of Pneumatic Cylinder and the supply pressure of the air supply. The required Pneumatic Cylinder push (pull) force can be calculated based on the load and the normal operating pressure of the system. When choosing Pneumatic Cylinder, it should be noted that the working load should be between 60% and 80%. Under the same air pressure, the larger the inner diameter, the greater the thrust of Pneumatic Cylinder.