The Impact Of The Working Environment On Pneumatic Cylinder

Pneumatic Cylinder is used as a pneumatic source in the entire pneumatic system. The use of air compressors to convert the mechanical energy output from the motor or other prime mover into the pressure energy of the air is an important guarantee for the operation of pneumatic components.

1.Pneumatic Cylinder will determine the thrust and tension of the Pneumatic Cylinder output force according to the amount of load force. Under normal circumstances, the Pneumatic Cylinder force is required according to the external load theory equilibrium condition, so that the Pneumatic Cylinder output force has a slight margin. If the cylinder diameter is too small, the output force is not enough, but the cylinder diameter is too large, which makes the equipment bulky, the cost increases, and the air consumption is increased, which consumes energy. When designing the fixture, the expansion mechanism should be used as much as possible to reduce the size of the Pneumatic Cylinder.

2. Pneumatic Cylinder needs to effectively check the installation connection points for looseness before use. Safety interlock should be considered in the operation. When performing sequential control, check the working position of the Pneumatic Cylinder.

3. When the Pneumatic Cylinder is used in a dusty environment, a dust cover should be placed on the piston rod. The single-acting Pneumatic Cylinder's breathing holes are fitted with filters to prevent dust from being drawn from the breathing holes. For the Pneumatic Cylinder that needs to be lubricated with an oil mister, the lubricant to be used should not expand or contract the seal ring, and it will not emulsifie with the moisture in the air.