Steps for selection of rodless cylinder

There are many kinds of rodless cylinders, including single-axis rodless cylinders, rodless cylinders with guide rods and so on. The selection of rodless cylinders is more important, not only depending on the structure, but also observing the reaction speed and intensity. Next we will explain the following seven steps:

1. Choice of Cylinder Diameter for Rodless Cylinder

The cylinder diameter of the rodless cylinder needs to be calculated. Generally, we can determine the output force of the cylinder only according to the load of the cylinder.

2. Judgment of stroke selection of rodless cylinder

The choice of the stroke of the rodless cylinder depends on the scene and the mechanism stroke. In most cases, we do not need the full stroke rodless cylinder.

3. Determination of Strength and Stability of Rodless Cylinder

4. Installation method of rodless cylinder

In different situations, the installation methods of rodless cylinders are different. For example, lathes and grinders need to rotate rodless cylinders, while piston rods need to do arc swing, pin cylinders need to be selected. In most cases, fixed cylinders are used more frequently.

5. Choice of Cylinder Buffer Device

The choice of cylinder cushion device needs to be determined by the piston speed.

6. Selection of magnetic switch

The rodless cylinder needs special matching when choosing magnetic switch, otherwise it will not be able to use.

7. Different environments need different configurations

In dusty or polluted environment, rodless cylinder protruding end needs to be installed protective cover, if there is no pollution environment, it is necessary to use oil-free lubrication cylinder.

These are the steps for selecting the type of rodless cylinder. In fact, in summary, we should pay attention to the following: the total stroke of rodless cylinder and the total stroke of rodless cylinder.