Precautions For The Use Of Rodless Pneumatic Cylinder

1, the speed adjustment of the rodless Pneumatic Cylinder

When using the speed control valve for speed adjustment of the rodless Pneumatic Cylinder, the throttle valve should be gradually opened from the fully closed state to the desired speed. The number of adjustment turns does not exceed the maximum number of revolutions. After the adjustment is completed, the lock nut is locked.

2, the requirements of the use of the environment

 In places where there is a lot of dust, water droplets and oil droplets, the rod side should be equipped with a telescopic protective cover. Where a telescopic protective cover cannot be used, a rodless Pneumatic Cylinder with a strong dust ring or a waterproof rodless Pneumatic Cylinder should be used. The ambient temperature and medium temperature of the rodless Pneumatic Cylinder should be antifreeze or heat resistant if it exceeds -10 to 60 °C with a magnetic switch. In a strong magnetic field environment, a rodless Pneumatic Cylinder with an automatic switch resistant to strong magnetic fields should be used. The standard rodless Pneumatic Cylinder must not be used in corrosive mists or in mists where a seal ring is used.

3, the rodless Pneumatic Cylinder buffer

When the kinetic energy of the rodless Pneumatic Cylinder cannot be completely absorbed by the rodless Pneumatic Cylinder itself, a buffer mechanism (such as a hydraulic damper) or a design buffer circuit should be added externally.

4. Rodless Pneumatic Cylinder for low speed sports

Due to the small flow rate, speed control and oil mist lubrication are difficult, if the size of the original is still not enough, the gas-liquid converter or gas-liquid damping cylinder can be used.